How To Fix A Rca Tv With No Picture But Sound

Loose or damaged cables if your tv is getting its signal from an external source. Rca has been a leader in electronics since the company's beginnings in 1919.

Rca 42 1080p Full Hd Led Television - Rt4201 The Brick

A cable box or a dvd player, then the possible reason why it is not displaying a picture is that the cable connecting the tv to.

How to fix a rca tv with no picture but sound. Turn the tv on and make sure that you have an audio. So, it is very important to double check this setting. Time to check the main board and the power board.

If your rca television won't turn on, there are a few things to try before you need to call a technician to look at your set. If thats good try the regular rca type video. Remove, clean and reseat terminals on j13104:

I have a blackout on my injoo 55″ where there is no sound or picture. Once the all the leds are exposed, you can check each of the leds with your meter by setting the meter to diode mode. “no sound but picture on tv” here are a few checks that can help you solve the problem and get back your tv sound.

Even the notifications are popping up in the corners (eg ad 1 of 2, next., etc). In this blog, let’s discuss the probable reasons why your tv has no picture, but the sound is okay and its possible solutions. I have my sony dvd player hooked up to my sharp roku tv i can hear the sound but no picture?

It is possible that the panel itself caused this, there are. Place meter on ohms or beep test follow same procedure no voltage should be shorted to ground. I have a lg smart tv has sound but no picture, and the power button want turn blue on tv it stays red:

In a darkened room, point a flashlight beam at an angle against the screen. With the tv turned on and the audio working try shining a torch at an angle close to the screen and check if you can see any images on the screen at all. I have had this roku for two years and never had a problem.

Even though the screen is black, can you see a faint glow coming from it like the back light is on? If you don't find one that's trying to climb, another method is to locate a short circuit. First, turn the tv on and make sure you can hear the sound.

Hi im renting to buy a 50 inch smart tv.it was ok this morning and no i have sound but no picture and there is a light on i The backlight works fine though but the tv is not displaying any picture or sound. None of the buttons on the back or the remote do anything.

If you can see the image then the problem is the backlight system. A girl at the repair shop suggested i unplug the tv and wait a couple of minutes and replug it back in. On some models, such as the 1616362b, turn off the television, then press the volume down button on the tv and the clear button on the remote at the same time.

Rca rtu6549 led television has sound, but no picture repair. And this is the problem, exchange them and you will. You will have to do some preliminary checks.

In tv and home entertainment technology. With the tv staying on and only the picture is going out then the problem could be a couple of different things. If there are images there, then there is a led backlight problem.

See if you can make out silhouettes etc. I posted right after you did with the same problem. Then try to bring up the tv menu.

She said lots of people bring tv's in with no sound and when they plug them in they work again. If so, it’s your backlight. There are two different parts that are available that may fix this issue. 

If you break it then the panel can consider useless unless if you know a way to fix it. Turn on and see if the unit tries to climb. It’s all fine after unplugging and then plugging it back in.

I have unplugged it, looked threateningly at it, no change. Shine a flashlight on the screen and see if you can see any image (you should be able to). Don't know why, but it worked.

Press them both for five seconds, then. Unit had good music or stereo but the voice was low. When you are removing the led tv internal parts be extra careful for the tab bonding.

Sun aug 13, 2017 6:55 am post subject: Good evening i have 32inch digihome built in freeview tv that was purchased in 2013 but tonight when i turned it on there was no picture on the screen but i could hear the audio of the freeview channels but no picture on the screen and all the connections are in properly. I'm sorry to hear that your television has lost its image and i would like to assist you. 

Now all of the sudden, i get the home screen with all my channels, the channels open, but when i choose a video or movie, no picture. And turn on the tv (be sure you have sound so you know the tv is on). Mute can fully disable sound on your tv.

Sometimes, anyone other than you can mute the sound and you may not know about it. Either with the power board, the led backlights or perhaps the mainboard telling. Jvc 50 inch tv no picture sound:

They will be very faint if they are there so trying this in a darkened room may help to see them. The main board or the power supply might fix this, but it will require a technician to perform some electrical diagnostic tests to verify which board is causing the issue.  Strange as we had no power surges or outtages, but try it.

If those are okay, it’s your backlight array.

Rca Crk17tf1 Tv Guide Plus Gemstar Remote Control Pink For Parts Or Repair Only Rca Remote Control Remote Rca